Tag Archives: Arduino

New Servo Driver

After testing  with various servo drivers I came across this blog by ‘arvid’ – it’s designed for controlling 20 servos. This is too many for my requirements, and, it also means that pin 2 gets used up by a servo – no good as I need pin 2 for the DCC interface. However, after a quick note to ‘arvid’ he came back with a suggestion to help modify the code for my use. I’ll report back as I go on with the testing.

What’s this all about?

Well, some time ago I came across a number of DCC Accessory modules on the market  designed to use simple servo motors to control model railway points. After having a look at one of the products and then discovering what the price was I decided to see if I could build something a little more economical and in reach of the pockets of more modellers.

The system I have been working on is based on a small micro processor solution using ready made modules – Arduino. This means that it requires very little in the way of soldering skills in order to put together a working unit. The only part that really requires some soldering is the actual module that converts the DCC track voltage & signal into a 5v logic signal that the micro processor can use.

This blog contains my notes as I develop this solution so that others may benefit from my efforts.

Feel free to contact me via this site if you have any specific questions.